TOTEMS, PYLONS & PORTICOS
The totem provides an efficient highlight of your identity (forwards or upwards), close to the traffic and without interfering with the building’s architecture.
Complementary Information:
Structural support :
- 1, 2, 3 or 4 steel post(s); square, rectangular or round post(s); the posts can be visible
(photo) or integrated to the totem
(photo); non-rust finish (by sandblasting) and metal-plating by hot zinc projection, 1 primer layer and 2 paint layers with reference colour Ral
(your choice).
Metal-plating
(photo). Welded base platinum with reinforcement consoles ; double-bolting on the barrel vault with assembled threaded metal rods, cast in a concrete foundation; the foundation and the post(s) dimensions are calculated by our technical research department.
- small totems can have an aluminium frame-work instead of steel posts;
- For these frame-works, the finish is with bodywork paint with a primer layer for adherence, two layers of acrylic paint, firing in a painting cabin
(photo); colours are as follows: Ral, Pantone, counter-typage based on a sample,…
- very large totems
(pylons) are based on a round post (photo) or possibly on a tri-dimensional structure
(photo).
Faces:
- Generally, bent faces made out of aluminium sheet or smooth faces made out of Dibond
- Bent faces made out of aluminium sheet with top and bottom welded lids; vertical side double fold; joined by means of a “dip” between the faces; no visible binding or screws on the faces or the sides (photo).
- Dibond smooth faces
(photo) 4 mm with trimmed vertical folds, with or without a « dip » joint; binding on an aluminium welded invisible frame-work...
- The decorated part can just be a neon sign framed with posts
(photo).
Dimensions:
all dimensions are bespoke:
we have already made a 43 metre high totem… would you like to challenge us? (photo)
(photo)
A few standard features :
- with bent faces – single sheet : 3000 x 870 mm – 4000 x 1260 mm
- bent faces - with horizontal joints: 4500 x 870 mm – 6500 x 1260 mm; 6500 x 1800 mm
- with smooth faces: 4000 or 6000 x 1300 mm.
For more photos of our products, go to our gallery